Fischer ULTRACUT FBS II 10x120mm 65/55/35 US

Part Number : U0171147

Description

Fischer ULTRACUT FBS II 10x120mm 65/55/35 US The high-performance concrete screw for absolute installation ease. The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.
Advantages: With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses. The special saw tooth geometry enables fast cutting into the concrete. Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper. Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings. The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2. The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again. The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.

  • Permission: ETA-15/0352, ETA-20/0321, DoP 0184, DoP No. 0078, DoP No. 0146, Z-21.8-2049
    • Applications: Guard rails, Consoles/Base plates, Metal profiles, Shelving systems, Protection barriers, Results / beam anchors, Temporary anchoring, e.g. of building site equipment, Shuttering props
    • Approved for: Concrete C20/25 to C50/60, cracked and non-cracked
    • Also suitable for: Concrete C12/15, Solid building materials, Masonry with a dense structure
    • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses
    • The special saw tooth geometry enables fast cutting into the concrete
    • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again
    • ETA-approvalETA-approval
    • Permission: ETA-15/0352, ETA-20/0321, DoP 0184, DoP No. 0078, DoP No. 0146, Z-21.8-2049
      • Applications: Guard rails, Consoles/Base plates, Metal profiles, Shelving systems, Protection barriers, Results / beam anchors, Temporary anchoring, e.g. of building site equipment, Shuttering props
      • Approved for: Concrete C20/25 to C50/60, cracked and non-cracked
      • Also suitable for: Concrete C12/15, Solid building materials, Masonry with a dense structure
      • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses
      • The special saw tooth geometry enables fast cutting into the concrete
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again
      • ETA-approvalETA-approval

Technical Specification

Technical Specifications

AX Part Number GM000020475
Huws Gray Part No U0171147
Manufacturer Part Number 536863
EAN Barcode 4048962251463
Boxed Weight 0.5kg

£2.41 inc VAT

Please enter your location for stock availability .
Please enter your location for stock availability .