GTEC Deco Filler 12.5kg
Plasterboard, Plaster and Accessories - Compounds and Adhesives -
GTEC Deco Filler 12.5kg GTEC Deco Filler is a gypsum based setting compound designed for bedding and filling joints by hand when using the GTEC Deco System. Has a 90 minute setting time.
Application - Preparation: Plasterboard surfaces should be reasonably clean, dry and protected from environmental conditions. Boards should be fully fixed, and any proud fixings should be driven plumb with a hand screwdriver prior to spotting and jointing. Mixing: Siniat Joint Filler should be added to the required amount of clean tap water in a clean container. Leave compound and water to stand for 5 minutes, then mix until a smooth workable consistency is met. Excessive mechanical mixing should be avoided, and low speed mixers should be used. Once the material starts to set it must be used quickly or discarded, it cannot be remixed. Contamination from previous mixes can shorten the setting time and reduce the strength of the product when set. Application of compound: Apply the Siniat Joint Filler to the joint, embed GTEC Joint Tape and immediately overcoat to fully fill the tapered edge boards. Ensure Product is properly set before applying the finishing coats with Siniat Joint Cement. Do not forget to spot fixings with a dab of Siniat Joint Filler. Maintenance: If product is correctly applied and exposure to environmental conditions is kept within limit, and no mechanical damage has occurred, then no maintenance should be required.
Store in a dry environment. Protect against frost, high temperatures and exposure to direct sunlight. Prolonged or repeated exposure to moisture may cause loss of strength or adhesion. Use product within 9 months after production date. Product is marked with production date and time to permit strict stock rotation and precise quality control.
- Powder setting compound
- 60 Minute Working Time, 90 Minute Setting Time
- Min. working Temperature > 5°C : Max. working temperature < 40°C
- Acoustic, Fire, Impact & Security
- Calcium sulphate hemihydrate and limestone.
- 25m^2 Coverage per Bag
- Approx. 7 liters of clean water required per 12.5 kg bag. Additional water can increase shrinkage.