YTC GNTT6WH Genesis Pvc Tile Trim 6mm x 2.51m White

Part Number : U0160255

Description

The ETR profile features a smart quadrant face which is good for 3 dimensional alignment, overhang lips to better butt against the cushion edge of the ceramic tile, and a second upright to support the face making it the most suitable trim for floor tile use.
UPVC is particularly suitable for a wide range of application due to its excellent chemical resistance, however note the following: Not recommended for use above 60°C resistant to most oils, alcohols, petrol and fats. It is unsuitable for use in contact with aromatic and chlorinated hydrocarbons, ketonesm nitro compounds, esters and cyclic ethers with cause some swelling.
Installation: 1) Select ETR according to tile thickness. 2) Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 3) Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required. 4) Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 5) Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1mm lower. 6) Fill the joint completely with grout.

  • Genesis ETR requires no special maintenance
  • Clean periodically using a neutral detergent to maintain the appearance.
  • Regular cleaning aids the longevity of the profile and ensures there is no corrosion that could affect safety.

Technical Specification

Technical Specifications

AX Part Number GM000132529
Colour White
Width (mm) 21
Depth (mm) 6
Length (mm) 2500
Material PVC
Manufacturer Part Number GNTT6WH

£4.50 inc VAT

Please enter your location for stock availability .
Please enter your location for stock availability .