Azpects EASY Efflorescence Remover + 1Ltr Conc.

Azpects EASY Efflorescence Remover + 1Ltr Conc. Azpects EASYGrout is a high-quality slurry grout for use on porcelain. Azpects EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on porcelain floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking. It is available in three colours and is suitable for grouting joints internally and externally around porcelain tiling and paving slabs, filling joints from 5mm up to 25mm wide with a minimum joint depth of 20mm. Available in 15kg tubs packed in 3 x 5kg bags for more economic mixing - less waste.The coverage of EASYGrout depends primarily upon the tile / slab dimensions and the joint width and depth.
General information: EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking. It is available in three colours and is suitable for grouting joints internally and externally around ceramic, porcelain, natural stone and clay paving slabs, filling joints from 5mm up to 25mm wide with a minimum joint depth of 20mm. EASYGrout has a workable open time of up to 1 hour and can be walked on within 3 hours curing rapidly to give a high early strength shrinkage compensated durable mortar.
Before you start to use the product: Always ensure the tiled and paved area is stable and secure before proceeding with grouting of the joints. Ensure all joints are raked clear of any excess loose residues and accumulations of water to allow an even and consistent depth of grout to be applied in all areas. Note: Certain types of tile and stone slab may be unduly porous and hence prone to surface discolouration, especially when applying coloured grouts. Natural stone and porous, un-glazed tiles are particularly at risk from permanent discolouration. To avoid this always carry out a small trial test, applying freshly mixed grout to a spare tile to determine whether staining is likely and consult the tile manufacturer as to whether they recommend a suitable sealing compound to protect the surface. Immediately prior to proceeding with the application, dampen the whole area to ensure the tiled surface is wet (not soaked) prior to grouting the joints.

• Fine textured finish
• Non porous
• Rapid set
• Suitable for interior and exterior use
• 3 x 5kg bags for minimal waste

• Fine textured finish
• Non porous
• Rapid set
• Suitable for interior and exterior use
• 3 x 5kg bags for minimal waste

Technical Specifications

Documents

• Azpects EASY Efflore - 2670-EASYCare-Efflorescence-Remover+ - SDS (0B)